Quote:
Originally Posted by bmitchell82
As for your problem,
A- if you have used longer bolts for culmination, have you increased the spring tension to match?
B- Have you actually checked where focus is, because remember that for your eye pieces to come to focus the camera focus point is no different just where the focus pickup is.
C - Try a barlow see if you can reach focus.
you have to figure out how far away the camera sensor is from the focus point that will tell you if a low profile focuser will work, or a slight nip tuck of the tube is required.! over all, this is not a big task, just one for a steady hand.!
|
hi. i did use a bar loe i did get focus but i didn't have my mirro adjusted up or low profile focuser in. i still want to use the 10"for visual to. thats y chopping is out + i didnt want to wreck the scope.
les