|
Hi again,
What are you capturing the images with ?
If it's Maxdslr (which I have no experience with), and it is the same as MaximDL, then choose View/Information Window (Ctrl-I).
Check the Aperture size (View Area) in the window, it should default to the entire window and it should show you the min, max and average pixel values. If it doesn't try minimising the view to 25% to fit the entire image on the window, then drag the cursor round the entire frame to highlight as much of it as possible. If nothing still shows up in the information window, then you have a problem, most likely with Maxim if you can see that the image actually has data in it, (indicated by varying brightness in the frame).
|