collimating
Thanks Tim,
I probably should be more descriptive about what I asking.....
I understand the principle behind collimating..........my querie is that at the base of the primary mirror are 3 small philips head screws.
Are these screws the ones that I adjust the primary mirror with or am I to remove the large black end cap/cover on the primary mirror side which would then expose the required screws to allow adjustments?
I dont want to touch the wrong screws.......just need to know from an owner of an sw600 whom has collimated as to what I should and should not be touching.
Andyshotglass is a great site and the collimation video is 100% helpfull but as i mentioned i need to know what areas/screws do what at the primary.
Cheers
Roc
|