|
Try and get the hystogram into colour mode so it shows the red, green and blue bell curves. Then you can change channelmixer between the 3 colours and use it to move the position of the colour bells left and right on the hystogram. Try and line them up on top of each other so the resulting colour on the hystogram is mostly grey and go from there. You need to move and release the sliders on channel mixer before it shows in the hystogram and also stretch the image to get the colour bells onto the hystogram in the first place. Stretch means to use curves.
Does that all make sense?
Last edited by Tandum; 21-12-2008 at 11:59 PM.
|