Quote:
Originally Posted by mick pinner
if l cannot read the numbers what is the procedure to determine the steps?
|
Hi Mick,
London to a brick they will be 8192.
However, here is a procedure to check.
Enter 8192 in SETUP ALT STEPS and SETUP AZ STEPS.
Please refer to the Daytime Encoder Test on pp 116-117.
Power off the unit and center a distant terrestrial object. Power on the unit.
DIAL up MODE ENCODER, press ENTER. Spin the DIAL one click
to show ENCODER STEPS. Lock the RA axis and rotate the scope in Dec axis 360 to
re-acquire the target. The right-hand ALT steps value on the display should
return to within a step or two from where you started.
Now lock the Dec axis, unlock the RA axis and repeat the test in RA.
Best Regards
Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au