|
It is scary but real easy once you have done it once...
What got me was I spent ages trying to unscrew a washer..It would turn about 5 degrees and I turned and turned ...but it was not treaded ... There was a site...Spanish ... so that was interesting.
Have a go ... I cleaned it and bought a little engraving tool and polished and polished... but on the positive I was very impressed with the gear mesh from the wear marks it was a perfect mesh out of the box...
I dont know if the lite oil really works but feel that is does... and given how slow they go lack of greese wont see it seize under high revs...but I think one needs to be able to clean the gears... I found a small spider squashed in the gears which would have translated to PE and one would suspect that dust may get in so being able to clean it is useful.
I used to blue print motor bike two stroke motors and one realises that the factory can leave stuff where is should not be..A single metal filing can stuff tracking really... but internally I was more than impressed with the eq6
alex
alex
alex
|