Quote:
Originally Posted by Kal
I'm pretty sure it is not software related, PHD passes it's calibration and I see the guide star move in all 4 directions during the process. I tried .3x , .5x & 2x guide speeds on the Losmandy drive system, each with various backlash settings and various aggressive settings from 30% to 100% - forcing PHD to do a calibration each time, all to no avail.
|
Kal - To use the G11 DD with PHD, make sure you are set to PHD defaults and the mount is set to "2x" guide rate while calibration is being done. Once PHD has stopped the calibration cycle and is actually guiding, switch the mount to ".3x". I set my aggressiveness to about 75%. This is straight from Losmandy and works for me.