Quote:
Originally Posted by Zuts
Hi,
Again I dont understand. If you are saying you are using an AC/DC adaptor which plugs into mains power and outputs 12V/1A then i would say no, dont use it or you may blow the hand-controller.
Cheers
Paul
|
I wouldnt have thought the power pack will be a problem. As long as the power pack is at least 100mA, it should be fine. If the hand controller is drawing 100mA, then it will only draw 100mA, even if the adapter is rated at 1A.
At least that is how I thought it worked anyway
