|
Hi Jase
I agree it certainly isn't my best. Some of the data was good but the OIII was starting to get noisy towards the end of its run and the SII was all noisy, 2 of the subframes affected by wind gusts. None of the master frames was pre-processed, as soon as they were combined the 3 were colour combined using a standard 1:1:1 weighting and the end result was then processed in CS2. This is very much how I do all my processing with exception to the weightings which I vary depending on the results I am looking for. I haven't got into clipping masks, etc as I am still very much in the early learning stages of processing at the moment, but this will come as I progress
Best wishes
Gordon
|