|
Hi Trev,
I did notice that temp regulator at Oatley outputs 10v to the peltier module, The only way you could up the voltage is alter the curcuit somehow to up the voltage. Maybe a resistor value with the voltage regulator? I don`t know enough about these things to be of much help.
Also just check the PS like mentioned to make sure there is the capacity to supply the full load. Im ditching my old PS (ATX pc supply) as it can`t handle the load (total of 5-1/2amp) even thou it says 14amp @ 12v , and drops to only 9.3v with full load. My new ATX supply handles the load nicely with only a .3v drop.
cheers
|