|
Owwww - that was harsh - I find my 127 completely useable with the stock focuser ... however I did have to adjust the tension and I only hang a Canon 20D or OpticStar 145m off it both via a WO 2" adpater which is a good fit and stays flush and tight to the draw tube.
I would prefer to use a direct screw coupling to the compression ring but cannot determin the thread used on the draw tube - it seems and odd size/pitch. Anyone out there got an adapter that takes that draw tube thread to a T?
The focus lock on my unit is not effective...but I do not seems to suffer from creep so it does not bother me.
|