Hi Guys, well for the life of me I cannot get this stuff to work with my 5D, I can get by with out it but would like to see how this works.
It has never worked form day one.
I have watched the disc so many times, and followed every instruction to the letter, I have even printed out each step and followed it carefully, and still not a hint of working.
So could some kind person please enlighten me.
It tells me each time that, it cannot open the DSUSB Port
whatever that means
This is how I do it.
Image Plus DSLR Focus
Open Canon DSLR, and go-to New Canon Camera’s Control Window
Go-To Bulb Capture to check ports, this will clear the port.
Choose ShoeString cable and choose type of Camera
Then press Re-Set to open port, this will open Bulb Capture Port
Go to connect button and click this button
Now turn the camera on.
Go-To Connect button again, and click this button
Choose where you want to save the images taken, Transfer Directory and Choose Location
Go-To Settings to set Camera Parameters. Eg Raw, ISO etc
Custom settings cannot be changed, but you can check how your Camera is set
Go-To Focus tab
Press Release, you may use mirror lock up here if you want
Use Default Parameters
Select Sub Picture, and click Sub Frame Image Tab, use test Star for the Focus.
Select the Star you want to Focus on and Click it
Default Half Flux Diameter, use this setting all the time
Press release, and set the time you wish for the exp time, eg 2 or 3 sec’s
Adjust Focus in between firing of the shutter, you can set the delays of firing
Set Delay for Camera to what you want in between shots e.g., 2 or 3 or 5 Sec’s
Or use loop
Manually change the Focus between each shot
Press Cancel when you are happy with the Focus, be careful not to move Focus
The object is to get the Green line to merge with the best bottom line on the Graph
Many Thanks.
Leon
