Joel, yes, you need a tool or two sometime. Again search for threads on this site. I suggest you search for "cheshire" and "laser collimator" - happy reading.
However, knowing what you are looking for now, ahving watched Andy at work, you can do a respectable job by eye alone. Your Bintel manual will have a reasonable section describing collimation. The one thing that will help is the el-cheapo "collimation cap". Pick up an empty 35mm film cannister. Throw the lid away. Drill a 1-2mm hole in the centre of the bottom. Fit this into your 2"--1.25" adapter - push it in from underneath, with canister bottom upwards, until the lip stops it going in further. Tighten up the compression ring. Pop into focusser. Look through hole. This keeps your eye position centred in the focusser while you make adjustments.
However, don't be surprised if the scope arrives from Bintel fairly well collimated.