Quote:
Originally Posted by CoombellKid
I used the same 1.5mm Hoop pine ply for the SC wall on my 16" and made a
tube 440mm bending along the long axis. I'm buying another sheet to
make a hat box for the SC. So it can be done, you can also get it 0.7mm
3 ply aparently.
Lovely job on the 8" Ian 
regards,CS |
Thanks Rob. That is good to know you can bend it lengthways, where do you get the 0.7mm ply from BTW??
UTA has now come off the former. Focuser and truss attach points fitted. I am leaving the masking tape on for the moment to protect the ply surface. 2.6" secondary and 4 vane mount has been ordered from Protostar.