Nice solution Monte.
I am interested in this as well as my cables were getting to be a mess of stuff.
I used black electrical tape to tape the cables for the different cameras separately.
In my case in one setup, I have a camera, a filter wheel both with power supply and USB 2 cables, then a guiding camera with 3 cables.
So I taped the camera and filter wheel cables in one bundle and the guide camera in another.
A common power supply/USB hub would be nice.
I believe there is a company that makes these in the US. From memory it is called Astrohub.
Greg.
Quote:
Originally Posted by montewilson
I got this tubing from Jaycar and provided you dont put too many cables in it, its a good performer. Note how I ran it along the mount, I did this and it improved my pointing quite a bit as compared to having it hanging off the back of the camera.
|