Thread: Loose screws on my scope causing "falling" back
View Single Post
  #5  
Old 11-06-2008, 06:10 PM
rmcpb's Avatar
rmcpb (Rob)
Compulsive Tinkerer

rmcpb is offline 		 
Join Date: Jan 2005
Location: Blue Mountains, NSW
Posts: 1,766
Just drop the primary mirror cell out of the tube, 6 screws around the base. Reach in and tighten the screws, not over tight, and fix with Locktite. Put the mirror cell back in and collimate. Easy!!
Reply With Quote