G'day again
Yes the weights also point south and should be directly over the leg marked N which should also be pointing due south. Consider the weight bar as the front of the mount. When you install the head the whole lot should point south including the front of your telescope. When you set the lattitude the side with the weights should be higher then the side with the polarscope.
PS: I nearly forgot. If you stand behind the mount (polar scope side) and look toward the front of the mount, the bolts that hold the dovetail in place must be on the right hand side. For some reason the mounts do strange things if you leave them on the left side. It is best to place them here before you attach the telescope.
PPS: I dont know of a site with videos but I just googled this site which has some good info, just substitute
south for all references to
north. Ignor the photography stuff and concentrate on the visual.
http://www.themcdonalds.net/richard/...pEqPolar.shtml