|
I just re-read what you asked - you're disconnecting the OTA from the old mount right - so that only C11 OTA and Losmandy dovetail is all you're connecting to the EQ6 - else dis-regard what I suggest below.
* * * * * *
It very well could attach if you can mate the Losmandy dovetail (Presumeably a "D" type) to the EQ6. I mated my C9.25 with a Losmandy D dovetail to a Vixen Atlux by using the Takashi / Losmandy D connector (supplied from Bintel).
What does the head of your EQ6 look like - I had to remove the head of the Atlux (the vice taking a 40mm wide bar, connected by two screws 40mm seperated) and confirmed the Tak connector had holes 40mm apart (and takes the 100mm wide Losmandy D dovetail).
|