Rang Andrews yesterday arvo and the focuser arrived today. I was expecting it towards the end of the week, cheers to Andrews.
I have already pulled it apart and greesed it up as described here :-
http://www.backyardvoyager.com/gsofocuser1.html
I removed the old focuser and noticed I'll need to enlarge the old mounting screw holes a little as the GSO mounting bracket holes don't line up exactly with the existing ones in the tube and either get longer screws or counter sink the GSO holes a bit to get it installed as the existing screws are too short.
But the old focuser has a flange that fits snugly into the draw tube hole while this one has no such flange and can be moved around a bit in the mounting position. So there is a chance it won't end up in exactly the same position as the old one.
Will I need to colliminate the scope once I finally swap the focuser or does collimiation purely deal with mirror alignment
