Roll off Roof Observatory Design
Due to factors beyond anyones control I am not now buying a SkyShedPOD. I have built the deck and it is 3.5m x 3.5 m. Below are some drawings of the current concept. The frame will be pine and lined with 5mm ply. The outside will be clad with cedar wb's with sisalation and pink batts in the walls and roof cavities. The wall is only 900mm high when open and the highest point inside is about 2.7m. Inside it will be 3.3m wide and 3.0m deep.
Here are a couple of drawings of the 'roof' closed and open.
Any further ideas or comments?
|