Hi Again,
If the cable has a 4P4C plugs at both ends and is wired one-to-one, as you state, then all you need is a Telephone handset curly-cord.
Provided that all for pins are wires (Some only have the 2 centre pins connected.).
If that is all you need, I have a stack of 1m long cables here.
Paul.
Quote:
Originally Posted by Arthur Alchin
Thankyou for that link Barry, I think I need a slightly different cable config as I have the Autostar 497 on an LXD75 8"S/Newtonian the chart shows the LX200 Autostar 2 setup.
I think the wiring diagram is available and says it's a 4p4c to 4p4c with 1->1,2->2;3->3 and 4->4 (sounds to easy).
Do you think the RJ10s and 11s are interchangeable?
arthur
|