|
Hi David, If you see on the LCD screen F2.0 instead of F0.0 (at least this is what my adapter does), it means that the camera communicates with the adapter.
The focus confirmation (beep) will then work in the usual way it works with any other Canon EF lens in manual mode (because the focus circuit is in the camera).
BTW, I also have mine (perhaps not from the same vendor, however the PCB looks exactly the same) and I have some troubles with it, it is intermittent (I am not sure why, all the pins seem to be touching the contact pads in the centre or very near), so I am waiting for a replacement...
Last edited by bojan; 22-01-2008 at 11:04 AM.
|