Thread: How Tight ?
View Single Post
  #6  
Old 16-06-2005, 07:32 PM
Starkler's Avatar
Starkler (Geoff)
4000 post club member

Starkler is offline
 
Join Date: Sep 2004
Location: Melbourne
Posts: 4,900
I do it this way :

Adjust the three larger collimation screws and then very lightly seat the locking screws against the metal plate. If you then gradually tighten each lock screw in turn a little at a time working around in a circle, checking collimation as you go, you'll find that you can get it right and have it stay there.
Reply With Quote