|
Hi guys
I am a real beginner at this webcam thing. all I did was point pick the frame rate and press the button. Here is the information you required Shutter speed was on automatic 1/25 sec. Frame rate 60. Colour/space compression 1420. Output size 320 x 240. Brightness was about a third, same with gamma and saturation. Gain was near high. White balance was on automatic. My adaptor is 35mm long. When I took the video of Jupiter the adaptor was light grey, I have since painted it matt black. It is made out of 38mm PVC pipe. Attached to it ia a amall 12mm aluminium tube pressed onto an aluminium plate. This I epoxied to the PVC pipe. The aluminium tube is fine threaded like the lens that came with the camera. A friend did this on a lathe. This image was taken without a Barlow infront of the camera, only the one at the bottom of the focuser. I did try with the barlow and the fuzzy image just looked bigger. I also made an adaptor for lens projection but I haven't as yet tried on Jupiter the clouds got me. I did the moon and it looked ok.
Regards Cristian
|