Hi BB,
I have the 12" The necessary mods cover both scopes.
1. A shroud is a must.
2. Replace the secondary collimation screws, with hand operated ones.
3. I had to replace the collimation springs in mine (as others have done) due to the originals being to soft, I'm not sure if this has been addressed by Meade (GSO).
I would have the end rings powder coated black (white in the light path is not a good idea)
I have fashioned a light/dew shield for the end of the scope.
Since installation I haven't lost one night because of dew.
Depending on the accessories that you fit, you'll have to add counter weights to balance the scope.
You can either buy commercially made ones or put together your own.
I can supply you with images of my mods if you wish.
