HELP, HELP, HELP
I have an EQ6 Goto mount with an ED80 as an imaging scope and a WO 66 as a guide scope fitted with a meade DSI.
My attempts at auto guiding have been less than impressive using both PHD and guidestar through a GUSB adapter. The results I am getting are little if any better than the EQ6 can deliver without the guiding. Can anyone give me the settings for guide speed etc for either of these programs.
My mount is permanently set up on a pier and is pretty well polar aligned. I must be doing something wrong or have a setting wrong somewhere. Adjustment pulses are getting to and adjusting the mount.
Please Help
Doug
