Quote:
|
Well done! Is that the shuttle on the mid-left pointing backwards away from the imager???
|
Thanks.
That could be the Shuttle, itseems to be the only area where it might fit in.
Quote:
|
Hi! I have a Panasonic miniDV camera as well, and am wondering what adapter you are using to mount yours on the eyepiece. I can't seem to find any for the modern Panasonic cameras, but would love to give it a try for planetary imaging.
|
I am using generic adapters for it... a 42mm thread for the camera (I'm only going on memory though, so it might not be that exact size. You'd have to check the thread size on your camera anyway) which connects to something called an F-adapter from EBay, which basically clamps to the outer edge of the eyepiece. I only got this a few months or so ago though, I used to capture my AVIs using a thrown together wooden adapter. If you want, I can take some pictures of how it all connects together?
Quote:
|
It sounds like you are missing your firewire drivers. These will either be available from the motherboard manufacturer, or from the manufacturer of the add in firewire card, depending on how it is connected.
|
That's the problem though, I don't know anything about the card. And I doubt anyone else does, because we didn't install it (a relative gave it to us and installed it for us, because we're all pretty computer illiterate here
). So I'm just wondering if there are any generic drivers available around the place that I could try. Other than that, I might just wait until I see that relative again.