View Single Post
  #1  
Old 26-10-2007, 10:31 PM
Zuts
Registered User

Zuts is offline
 
Join Date: Mar 2007
Location: sydney
Posts: 1,836
Question on EQ6 jiggles

Hi All,

I have a 9mm meade illuminated reticle. When 2 by barlowed on my 480mm scope what would be the angular size of the square in the middle of the reticle. And what would be the equivalent size with the 400d at prime focus.

I want to know because that will tell me how big the jiggling on my eq6 is. After drift aligning with a barlow a star will jiggle around inside the squre, back and forth.

is this correct

480 mm scope
9 mm reticle
2 by barlow

reticle is meade plossl and i assume 50 degree field of view


so 480 / 4.5 = 106.6 magnification

and actual field of view = roughly .47 degrees

if the centre square of the reticle is about an 80th of the width of the reticle then this angle would be about 0.006 degrees or about 2 arc seconds.

So the fact that the star jiggles around inside the square would not be a problem and should not be visible on my images with a 400d at prime focus?

What do you guys think; and do other eq6 owners get the jiggles?

Paul
Reply With Quote