Quote:
|
Is there a site that gives step-by-step instructions on how to train the drives, calibrate the sensors and do a proper 2-star alignment?
|
The manual sets out the calibration procedure. As long as the time and date are correct and you have the correct Lat/Long and time offset (from UTC) it should be correct. The operating procedure is much the same on the LX200. One other thing that may be a problem is the addition of sites, in some versions of handbox software additional sites cause problems and it's necessary to pick a site closest to your location then modify the coords to suit. Failing all else a reset, retrain and recalibrate may fix your problems. The calibration of the LNT module is not important if you do a manual 2 star align.