View Single Post
  #1  
Old 09-10-2007, 07:49 AM
astronut's Avatar
astronut (John)
2'sCompany3's a StarParty

astronut is offline
 
Join Date: Oct 2005
Location: Eagle Vale
Posts: 1,249
Lightbridge Counter Weights

Here is a new design for counter weights to mount on the Lightbridge scopes.
I might see if an engineering firm here can do the same job(does anyone have any ideas on this) otherwise purchasing direct might be a good idea.

12-inch LightBridge Counterweights - 3 lb. Set

http://www.farpointastro.com/product...nsetMedium.jpg
http://www.farpointastro.com/images/enlarge.gifenlarge... Rate this itemExcellent
Good
Average
Poor
Puny
US $59.00
In stock: yes
Weight: 6.5 lbs Discuss this product
(0 post(s))

Farpoint Astronomical Research introduces our basic counterweight set for the 12-inch Meade LightBridge telescopes. The "core set” consists of three 1 lb. weights that attach to the rear of the mirror cell. These weights replace the “push” or locking screws, making them a bolt-on addition.* This "core set” properly balances the telescope for use with a large 2-inch eyepiece and a finder scope or Telrad.

Additional clamp-on ring weights that work in conjunction with this set will be available soon. The additional weights will allow for the balancing of larger top-end loads (i.e., eyepiece + Telrad + finder scope).

*Before using this product, we recommended that the mirror cell springs be upgraded with the a collimation thumbscrew kit.

Last edited by astronut; 09-10-2007 at 11:44 AM.
Reply With Quote