View Single Post
  #3  
Old 30-09-2007, 11:57 AM
rogerg's Avatar
rogerg (Roger)
Registered User

rogerg is offline
 
Join Date: Feb 2006
Location: Perth, Western Australia
Posts: 4,563
COM1 is the serial port you want. Default settings of flow control etc should be fine. Normally for DSLRFocus I:

1) power up PC and open DSLRFocus
2) turn on camera
3) PC detects the camera with usual canon software - close that
4) go in to DSLRFOcus and connect

then it's all ready to go ... until the battery gets low on the 350D (before the indicator says it's low... can be a bit problematic).
Reply With Quote