You've probably just answered my questions Andrew. Thank you. Move the scope after de-clutching and "Sync" to a known new target. OK - time to try it out
The scope is in polar mode, and that's not a problem. It will still be aligned with the SCP wherever it is. It's the wedge surface that retains the alignment- not the forks.
PS: Even on the minimum acceptable mechanical slew rate, the motors are still too noisy. My backyard is pin-drop quiet at night, and I don't really want to advertise an expensive telescope to some of the neighbours we have - hence all of this.
Cheers and thanks!
Chris