|
I had a new aluminium top end rolled a while back, with new 6mm X 12mm strengthening rings. The intention is to redo the truss in 18mm tube using the Moonlite ball/socket truss connectors, and make a new mirror as I sold the old one. It'll definately be my next project after the 14" binos though.
The velcro mount is not hard to imagine. The mirror mount plate is triangular 1/2" ply with push pull bolts at each corner which mount to inside of the rocker box. There is a 5" hole in the middle of the plate and maybe a dozen 1" square Velcro pads in a 7" diameter to mount the mirror on.
|