Hi Adrian,
Thanks for the advice!
I'll give it a go tonight and report back.
I definitely have to correct time zone, lat / long set etc...
Regards,
Stephen
Quote:
Originally Posted by DeanoNZL
Hi all,
Stephen,
I had similar problems like yours with the park position.
There is an option to configure the park position.
As stated in the earlier posts, ensure it is indeed pointing to -90 before powering on the mount, then go to "Utilities, Park, & "set park position as current".
After that, slew away any amount, the go & "park" the scope.
Make sure that you power off after the park.
Power on and it should ask "Start from park".
Hope this helps.
|