View Single Post
  #10  
Old 01-08-2007, 01:36 AM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,999
Quote:
Originally Posted by Mr. Subatomic View Post
Would it all be configured in the 'Telescope' menu of CDC?

Eg. selecting Track and Show Telescope Position?
Hi Shaun,

Indeed, use the Telescope pulldown and choose Select Scope Interface.
Argo Navis supports the Meade protocol and many others, so you can just select
'Meade'. Use the Comm Settings tab to set the appropriate COM port on
your PC and the Baud rate. On the Argo Navis side, set the STARTUP command
on the appropriate SERIAL port (Argo Navis provides you with two independent
ports) to a matching BAUD rate and set the STARTUP command as 'meade'.

After aligning your Argo Navis, you can use the "Show scope position"
selection. What's neat is that as you move the scope, the position on the
screen is shown to you in real-time.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote