Quote:
Originally Posted by Garyh
Welcome to IIS Sletts02,
I don`t think you will get much change out of $150.
The plywood sheet will set you back about $40 or more by it`s self.
The pvc maybe $30 for 2 lenghts.
Aluminium will cost close to $20...
Add all the bolts etc you will be close to that...
cheers
|
Dang! Pitty my school are tight! They won't give me anything. I managed to steal 3 pieces of the aluminum cut off. I'll sacrifice one piece and make it in to 2 and see how it goes.
The plywood I'll just steal some kind of cheap wood and not stand on the dolly at all then upgrade if necessary in the future. Any ideas where I'd be able to steal/ask for offcuts from?
Nuts/bolts... I'll see if I have any friends that have those! Hopefully I can get out of this reasonably cheaply!
Thanks for all the help!