Quote:
Originally Posted by nmo
All in All still very impressed and I'd still be outside but it's to cold!
|
Hi nmo,
Great to hear that you braved the cold (it is cold tonight here in Sydney as well)
and gave the Argo Navis a run!
If you aren't using it already, you might like to begin using AUTO ADJUST ON
when you perform the FIX ALT REF step on your subsequent sessions.
To set it up, DIAL up MODE SETUP, SETUP ALT REF and enter a value of +090.000.
Then when you perform the FIX ALT REF STEP, DIAL up ALT REF=+090.000
AUTO ADJUST ON. Push the scope to the vertical stop and press ENTER.
Then perform your two-star alignment. After the second star alignment,
the WARP factor should read 0.00 (A) where the (A) denotes the ALT REF
point was automatically adjusted for you.
The User Manual in the sections on SETUP ALT REF and MODE FIX ALT REF
has further background on the AUTO ADJUST feature.
Thanks for the post!
Best Regards
Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au