|
Houghy you can test for this really easily, just use a collimation tool and insert it into the rear of scope and look in. You should see the mirrors' ringed and non should be cut off on the outside. Second then do a star test and if you had good collimation before then it should be still good. If it is bad then you know that this has affected collimation.
So do the rings test first. If that is fine then do the collimation test. If collimation is out then readjust collimation. If the first test fails, then I would reconsider using this product.
However, I would think that this product has had good reviews and works fine.
For my interest is this only for use on a Standard LX200 or can it be used on the GPS version? The GPS version has a mirror lock knob but it does have that little hole in the same place.
|