Interesting concept, and something I also considered before DP made a prototype peltier cooler for my 12.5". In my case I was simply going to remove the mirror assembly and place that in my home fridge.
As people have said, this is a bit of a trial and error situation so have a go and let us know how you go.
My advice would be to try and get a simple indoor/outside temperature sensor to know what the scope is doing relative to ambient as you try this set up. e.g. you might find that the scope needs to be say 2 degrees below ambient for xx hours to reach actual ambient etc.
Suggest that you have a hair drier on the ready to remove dew.
|