Quote:
Originally Posted by gbeal
Great idea Chris, thank you for sharing this. Any chance of a "cutting list" what specifically the resistors are, the heat shrink size, and the braid? PM if you want, or post here as I am sure others will want one of these, I do.
Regards,
Gary
|
Gary - Narayan's spot-on. This post is a follow-on from another I did previously (dew heater for 12" SCT), but if you go to Al's article it'll sort out the parts list for you:
http://www.iceinspace.com.au/index.p...63,292,0,0,1,0
I use 390 ohm 1/2w resistors.
Yes, if you go to Jaycar, ask for 1.5mm (or 3mm if they haven't the smaller) solder wick - "Gootwick" by name. It's about $4.00 for a 1.5m length. They also have the heatshrink tubing, and the stuff I used is 25mm across (folded flat).
Cheers
Chris