Quote:
Originally Posted by leon
Steve the dovetail plate should have a couple of holes in it already, just place it where you want it and get a fine pointed texta or similar and make your holes.
|
Ah ok, that should make things a little easier.
Quote:
|
I would start off with an smaller drill, and drill a pilot hole first, then go to the correct size you need for the screws, or bolts.
|
Ok, I will do that then.
Quote:
|
It is not a problem, and you wont do any damage to your scope, however if your not sure about it all, by all means get some help.
|
Now I feel a bit better :-)
My thanks leon. I expect to do this next weekend, hopefully I won't have ruined my b'day present
