Quote:
Originally Posted by richardo
Even dropping the green channel a fair way down with our ratio...
R :1, G :.94, B: 1.05 or there abouts...... knowing that this chip indeed is very sensitive in the green wave length,(bit like my SXH9) but found the balance getting lost and ending up with red core stars..... no way correct.
Rich
|
Rich / Rob,
I like both versions.
You may need to drop the green even further for this to work well, but you'll need to experiment with this. With the Custom Scientific LRGB filter set and the KAI-11000 chip, I usually start with 1.35:1.0:1.65 ratios (or if R is 1 then, 1.0:0.65:1.15). You'd need to verify the ratios against the Astronomik type II filters as they have different bandpasses and peak sensitivity lines. I found a good starting point for the KAI-11000 is 1.5:1.0:1.5 and working your way from there. I unfortunately have no images to show this balance as I'm presently scopeless. Will be sure to post as soon as I can though.
Keep up the good work.