Quote:
Originally Posted by Harpspitfire
i think if your all connected (it tells you at the bottom) you need to push 'guide' to start the calibation- then it automatically kicks in-- another question here though- while its calibrating- do you lose your alignment?
|
I would hazard a guess that when calibrating, with PHD electronically “pressing” the RA+ RA- Dec+ and Dec- motor movement buttons, it should be no different to the operator manually pressing the buttons on the hand controller, so the telescope pointing system should “remember” where it is as I assume it receives positional information feedback from the encoders?
I only lose positional information and void the pointing alignment if I manually undo the clutches on my Vixen and Tak mounts and move the scope.
Cheers
Dennis