Quote:
Originally Posted by jase
Hi Shawn,
Are you certain the ASCOM POTH is correctly configured for the LX200 protocol? Using Maxim, can you successfully connect and control the telescope through the POTH?
If so, then the problem is with CDC, if not you may need to reinstall ASCOM. Make sure you've also pulled down the latest LX200 driver as well.
http://www.ascom-standards.org/downloads.html |
Oh Hi Jase
Well initially I was pionting the softwares at each other, duh, as soon as i figured out that blonde moment, It worked a lot better..but the problem now is
There are two drivers for the LX200 in the Ascom hub, one suggests it is not shareable so I use the other one, ive shuffled the ports around so that the hub is on Com 1 rather than a usb serial device. I piont the hub at port one, I fire up the cdc select ascom protocol, and it works. now I go to maxim select Select Ascom Scope Dome hub and it does connect very briefly and the errors with the afformention invalid procedure arguement,
Latest Ascom 4.1 latest plugin, Its almost as if the maxim is talking a language the hub does not understand or vice versa...
Shawn