|
With my Classic LX200, while I have never had that particular problem (so far), I do from time to time have a blackout prob wth the H/C. A bit of a slap on the back and it comes good. Obviously a loose connection in there someplace. You might want to take the cover off your H/C and check the connectors in there, else see if you can get a new H/C. Check with Bintel, but there is a fair chance that a replacement board (if available) will not include eprom/s, in which case you will need to tx them over.
Another thing you might like to try would be to use a can of freeze spray and see if you might have a 'dry joint' developed in there
luck,
Doug
|