Quote:
Originally Posted by Leo.G
For a temporary solution what you have done is beyond impressive!
Is that Ply you've used or particle board/MDF?
I couldn't see in the images, if particle board/MFD basic PVC wood glue is great to seal it to weather proof/make it weather resistant for dewy nights. If ply that is of minimal importance but the PVA glue is still good on edges. It can be mixed with water and painted on with a brush and dries clear.
I have no idea why I'm telling you this, with what you've just built I'm sure you know.
|
Haha yeah all good, it is 26mm chipboard with laminate on both sides, from an old stock stand shop fitting from a bookshop. The edges have been painted with 2k epoxy resin mixed with black pigment, as are all the glue joins along with a healthy amount of biscuits for good measure. Recycle what you have was the name of this build... so I used what I had laying around and built the mount for $0.