Thank you.
I have set up the mount on easy tracking mode and took the plate off covering the gear. It’s not aligned but the gears are definitely rotating whilst tracking. The odd thing is after 2 nights of issues the mount was still working via the ASIair too (or at least the ASIair was able to start and stop the tracking).
That was just in the house this morning though. The real test will be when I get it out tonight. Now I’m wondering whether the problem is whether something is off with the rate of tracking, rather than it not tracking at all. I have confirmed it’s set on the sidereal tracking mode though.
Appreciate your help and will report back. Thanks again
Quote:
Originally Posted by Ryderscope
Sounds good it is definitely worth testing the mount without the asi air involved to narrow down where the issue is. If it works fine with just the hand controller operating the mount (which I suspect it will ) then we can concentrate on what is going on with the asi air.
I’m wondering if there is a configuration setting in the asi air that is turn off tracking?
|