View Single Post
  #5  
Old 08-06-2025, 09:33 AM
vpp536 (Vik)
Registered User

vpp536 is offline
 
Join Date: Mar 2025
Location: Perth
Posts: 5
Thanks

Thanks. I have figured something last night.
It turns out the tracking works when the mount is initially switched on and I click tracking on using the ASIAir. But as soon as the tracking stops for any reason e.g. the mount slewing, or rotating with polar alignment etc, the tracking fails and won’t restart (either automatically or manually). Turning the power off to the mount and restarting it seems to sort it out and the tracking will start again. Does that help?

I will give 3 star alignment a go tonight. I didn’t try that.

Quote:
Originally Posted by Ryderscope View Post
Hi Vik, I note that you say that the issues started when you bought the new kit and that you are controlling the mount by connecting the asi air via the hand controller. If you haven’t done so already, I would recommend disconnecting the asi air and just use the handset controller to do a star alignment on the mount and confirm that the mount is tracking. This will isolate the issue to either the mount or the asi air.

CS,
Rodney
Reply With Quote