|
Thanks Joshua!
I have a length of 40mm 7075 somewhere, I just don't know where. A lathe, milling machine (still in it's box till I weld up a stand, 12 tonne work press, MIG, TIG and arc welding equipment (plus gas cylinders and consumables, grinding equipment and a whole host of other tools including a good cross slide table for the milling machine and vice doesn't leave a great deal of room in a 10x10 garden shed and I misplace things easily in there.
As mentioned I can set it up in a 200mm 4 jaw chuck with the dial gauge for acciracy.
Swing Over Bed 300 (mm)
Distance Between Centres700 (mm)
Spindle Bore 38
Swing over cross slide:190mm
2HP motor
This is the milling machine:
MODEL BF-20AV Digital Readout Optional Type Vertical Column Type Dovetail Spindle Taper - Vertical 3MT (mm)Vertical Travel (Z-Axis) 280 Type of Slides Dovetail (mm)Spindle Travel / Diameter 50 / 60 (mm)Throat Depth (max.) 185 Tilting Head (Left ~ Right) ±90º Tilting Head (Forward ~ Back) Fixed (mm)Drilling Capacity 16 (mm)End Milling Capacity 20 (mm)Face Milling Capacity 63 (No./ rpm)Spindle Speeds Vertical Variable (90 - 3000) (kW / hp)Motor Power - Vertical Spindle 0.85 / 1.13 (V / amp)Voltage / Amperage 240 / 10 (kg)Nett Weight 103
|