|
I’ve had my 2600MC for 4 years and my 2600MM for 18 months
I use APT to run these cameras and it provides the following data on the operation and status of the cooler
1/ Power consumption in %
2/ Cooling capacity in %
3/ Camera sensor temperature in Deg C
4/ Initial start up temperature of sensor
Both cameras have always been set to -10C ( no need to go any cooler )
My 2600MC in summer cools down to -10C from a starting temperature of approximately 22C to 25C ( power consumption sits at 100% , cooling capacity sits at 75% to 85% )
In winter it cools down to -10C from a starting temperature of approximately 12C to 16C. ( Power consumption sits at 100% , cooling capacity sits at 25% to 35%)
My 2600MM cooler performs slightly better than the 2600MC as it’s a newer camera.
Hope the above is helpful
Martin
|